Abrasive Materials Mil-Specs - FSC 5350

A-A-1041 - Steel Shot (S/S By Mil-S-851)

A-A-1042 - Steel Shot (S/S By Mil-S-851)

A-A-1043 - Steel Wool

This Commercial Item Description covers steel wool used as an abrasive for cleaning and polishing.

A-A-1044 - Wool, Metallic (Copper And Aluminum)

This commercial item description covers copper and aluminum metallic wool used as an abrasive for cleaning and polishing. This commercial item description may involve hazardous materials and procedures and does not purport to address the safety or environmental problems associated with it's use. It is the responsibility of the user of this description to consult and establish appropriate safety, health, and chemical disposal practices in accordance with all applicable state, local, and Federal regulations.

A-A-1045 - Grain, Abrasive (Mineral)

A-A-1046 - Mat, Abrasive (S/S By Mil-A-9962)

A-A-1047 - Paper, Abrasive, Silicon Carbide, Waterproof (S/S By Ansi-B74.18)

A-A-1048 - Coated Abrasive Cloth, Aluminum Oxide (S/S By Ansi-B74.18)

A-A-1049 - Cloth, Abrasive & Paper, Abrasive (Emery) (S/S By Ansi-B74.18)

This commercial item description covers abrasive cloth and abrasive paper, coated on one surface with emery grain.

A-A-1197 - Rubbing Compound, Lacquer

A-A-1200 - Coated Abrasive Cloth, Silicon Carbide (S/S By Ansi-B74.18)

A-A-1201 - Paper, Abrasive (Garnet Coated) (S/S By Ansi-B74.18)

A-A-1202 - Coated Abrasive Paper, Flint (S/S By Ansi-B74.18)

A-A-1203 - Lapping And Grinding Compound (Valve) (S/S By Ansi-B74.10 And Ansi-B74.12)

A-A-1206 - Coated Abrasive Cloth, Crocus (S/S By Ansi-B74.18)

This description covers coated abrasives comprised of a backing of cloth coated on one surface with crocus abrasive grain.

A-A-1722 - Grain, Abrasive (Soft Blasting)

This commercial item description covers soft abrasive grains to be used as abrasive blasting material for the removal of carbon from metallic surfaces.

A-A-2667 - Sand, Sandblast

This commercial item description covers sand for the removal of scale, paint, sand which adheres to castings, and corrosion from metal surfaces.

FF-S-740 - Steel Wool (S/S By A-A-1043)

FF-W-1825 - Wool And Gauze, Metallic (S/S By A-A-1043)

Metallic wools and gauzes covered by this specification are used as abrasives for cleaning and polishing.

FF-W-556 - Steel Wool (S/S By Ff-S-740)

GGG-C-520 - Cloth And Disks, Abrasive, Open Mesh, Waterproof (S/S By Ansi-B74.18)

JAN-G-479 - Glass, Ground (For Ordnance Use)

This specification covers one grade of ground glass, furnished in five classes, A, B, C, D and E according to granulation, as specified in the contract or order.

MIL-A-21380 - Abrasive Materials, For Blasting (S/S By A-A-59316)

This specification covers mineral type abrasives used with pressure blasting equipment to descale, clean, and finish metallic parts.

MIL-A-22262 - Abrasive Blasting Media Ship Hull Blast Cleaning

This specification covers nonmetallic abrasive materials used in the blast cleaning of metal surfaces and glass reinforced plastic surfaces, such as ships' hulls and tanks, for removing rust, scale, old paint and marine growth and to rpovide surfaces that are clean and suitable for painting.

MIL-A-22936 - Abrasive, Glass Beads (Use Mil-Prf-9954)

MIL-A-4864 - Aluminum Wool (S/S By A-A-1043)

This specification covers various types of aluminum wool.

MIL-A-9962 - Abrasive Mats, Non-Woven, Non-Metallic (S/S By A-A-58054)

MIL-B-16909 - Buffing And Polishing Compounds (S/S By A-A-59297)

This specification covers buffing and polishing compounds used for metal finishing.

MIL-C-10183 - Compound, Rubbing For Lacquered Surfaces (Superseded By Tt-R-771)

MIL-D-9914 - Diamond, Industrial

MIL-G-5634 - Grain, Abrasive, Soft, For Carbon Removal (S/S By A-A-1722)

This specification covers soft abrasive grains to be used as abrasive blasting material for the removal of carbon from metal surfaces, and cleaning of operating jet engines.

MIL-L-17862 - Lapping And Grinding Compound (For Chromium-Cobalt Hard-Faced /Seats And Disks) (Use Ss-L-1682)

MIL-P-2909 - Pumice, Ground (Abrasive Pigment)

MIL-P-3237 - Polishing Abrasive, Rare-Earth Oxide (For Optical Glass)

MIL-P-85891 - Plastic Media, For Removal Of Organic Coatings

This specification covers six types of plastic media used for removal of organic coatings in an abrasive blast operation.

MIL-PRF-9954 - Glass Beads: For Cleaning And Peening

This specification covers glass beads to be used with pressure/suction type blasting equipment.

MIL-S-17726 - Sand, Sandblast (No S/S Document, Refer To Mil-A-22262 Or A-A-2667)

This specification covers sand for the removal of scale, paint, sand which adheres to castings, and corrosion from metal surface. For use in a sand blaster machine.

MIL-S-20643 - Sand, Lithographic Graining (Aluminum Oxide).

MIL-S-851 - Steel Grit, Shot, And Cut Wire Shot; And Iron Grit And Shot-Blast Cleaning And Peening (S/S By Sae-J1993, Sae-J827, Sae-J444, And Sae-J441)

MIL-STD-852 - Glass Bead Peening Procedures

This standard establishes minimum requirements and procedures for glass bead peening of ferrous and non-ferrous parts which are subjected to repeated applications of stress such as the following: axles, landing gear parts, springs, gears, structural extrusions and wing panels. The purpose of such peening is to relieve stress, increase fatique life and increase resistance to stress corrosion.

P-C-1673 - Cloth, Abrasive, Emery (S/S By Aa 1049)

P-C-451 - Coated Abrasive, Cloth, Aluminum Oxide Or Silicon Carbide (S/S By A-A-1048 And A-A-1200)

P-C-458 - Cloth, Abrasive, Crocus (S/S By A-A-1206)

Crocus cloth covered by this specification is a cloth uniformly coated on one surface with crocus.

P-P-101 - Paper, Abrasive, Silicon Carbide, Waterproof (S/S By A-A-1047)

P-P-105 - Paper, Abrasive, (Flint) (S/S By A-A-1202)

P-P-121 - Paper, Abrasive, Garnet (S/S By A-A-1201)

This specification covers paper sheets and rolls, coated on one surface with garnet abrasive grain.

P-P-126 - Paper, Abrasive, Garnet, Waterproof (Use P-P-101)

QPL-22262-28 - Abrasive Blasting Media Ship Hull Blast Cleaning (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-3237-2 - Polishing Abrasive, Rare&Earth Oxide (For Optical Glass)

QPL-9954-7 - Glass Beads, For Cleaning And Preening

SS-C-614 - Compound, Valve-Grinding (Use Ss-L-1682)

SS-L-1682 - ( Images) Lapping And Grinding Compound, Valve (S/S By A-A-1203)

This specification covers two types of valve grinding compound.

SS-P-821 - Pumice; Ground, Abrasive

SS-T-665 - Tripoli, Dental