Inch-Pound
MIL-PRF-9954D
16 April 2009
Superseding
MIL-PRF-9954C
31 January 2008
PERFORMANCE SPECIFICATION
GLASS BEADS: FOR CLEANING AND PEENING
This Specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. Scope
1.1 Scope. This specification covers glass beads to be used with pressure/suction type
blasting equipment.
1.2 Classification. Glass beads will be of one type and 13 sizes as specified in Table 1.
2. Applicable Documents.
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Government documents
Comments, suggestions, or questions on this document should be addressed to WR-ALC/642 CBSG, 295
Byron Street, Robins AFB, GA 31098-1611. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST database at https://assist.daps.dla.mil
AMSC N/A
FSC 5350
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business