A-A-2667 Sand, SandblastThis commercial item description covers sand for the removal of scale, paint, sand which adheres to castings, and corrosion from metal surfaces.

Pages 1 - 2 - 3 - 4

A-A-2667A

6. PACKAGING

6.1 Packaging. The preservation, packing, and general marking requirements shall be as specified in the contract or order.

6.2 Marking. In addition to any marking or labeling required by the contract or purchase order, each container shall be marked with following:

WARNING
CONTAINS FREE SILICA
DO NOT BREATH DUST
MAY CAUSE DELAYED LUNG INJURY (SILICOSIS)
APPLICABLE OSHA REGULATIONS ARE TO BE FOLLOWED

7. NOTES

7.1 Part Identification Number (PIN). Sandblasting sand conforming with this commercial item description shall be identified by a part number configuration consisting of identification of a portion of the specification number, the grit size, type and class. An example of the part number configuration is shown below.

AA2667A2/30

7 = General specification number.

A = Grade A or B.

2 = Class 1, 2, 3, 4, or 5.

30 = Sieve size

7.2 Ordering data. Purchaser’s should select the preferred options permitted herein and include the following information in procurement documents (if applicable).

7.2 Ordering data. Purchaser’s should select the preferred options permitted herein and include the following information in procurement documents (if applicable).

a. Title, number, and date of this commercial item
b. Grade, class, sieve size
c. The preservation, packing and marking desired.