A-A-1047A
Responsibility for inspection. Unless otherwise specified in the contract or Purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
Sampling.
Lot. All sheets of the same grit size and backing presented for inspection at one time shall be considered a lot for purposes of inspection.
Sampling for quality conformance examination. A random sample of abrasive sheets shall be selected from each lot in accordance with MIL-STD-105 Inspection level I, AQL 2.5 expressed in terms of percent defective.
Sampling for tests. Sample for test shall be selected in accordance with the appropriate test method cited.
Certification of grading, breaking, strength and backing weight. When specified in the contract or purchase order, a certificate of conformance may be furnished in lieu of actual testing on a lot by lot basis providing that:
(1) Objective evidence dated not more than two (2) years prior to the date of the start of the contract as described in the solicitation or date of the purchase order as applicable shall be available.
(2) Tests specified in the industry standards referenced herein have been performed by an independent test facility acceptable to the Government.
(3) That the product being offered is the same type and grade of abrasive and backing material and has been manufactured using the same material, processes and manufacturing techniques as the product tested.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business